Screw Size For License Plate Toyota

Toyota owners are often faced with the question: what is the Screw Size For License Plate Toyota? The answer is not always straightforward, as it depends on the model of your car. However, a safe bet is a 1 x 0.5 x 0.5-inch screw for Toyotas. These screws provide reliable security and prevent the potential theft of your license plate.

The importance of suitable quality license plate screws should not be understated; they ensure that your license plates remain securely attached to your vehicle at all times. In addition, replacing worn or damaged screws is a relatively low-cost procedure that any competent mechanic can undertake quickly and easily.

What Size Are Toyota License Plate Screws?

What Size Are Toyota License Plate Screws
What Size Are Toyota License Plate Screws

Toyota utilizes 1 x 0.5-inch screws for both front and rear license plates. When selecting, it is essential to ensure the length of the screw considers all components that comprise the registration mount.

The overall mount includes the license plate itself; any padding or other material attached to the vehicle; and finally, any fastening hardware needed to keep it in place. Thus, when selecting a screw for your Toyota license plate, be sure its length covers all necessary elements of the installation:

  • Washers
  • Screw overs with a base
  • Car license plate cover (if legal)
  • License plate frame
  • License plate
  • Frame gaskets
  • Spacers

To ensure a secure fit, selecting the correct length of screws for the total applicable components is essential. If either too short or too long screws are chosen, they cannot affix all parts together correctly. To avoid this issue altogether, metal screw materials such as brass, stainless steel, and zinc-plated steel may be used to accommodate a variety of lengths that can exceed 12mm.

Regular Steel

  • Low-strength
  • General-purpose metal
  • Provides minimum rust resistance

Alloy Steel

  • Highly hardened
  • It offers little corrosion resistance

Zinc-Plated Steel

  • General use
  • Relatively expensive
  • Moderate corrosion resistance

Chrome and Nickel Plated Steel

  • Smooth and polished appearance
  • Moderate corrosion resistance

Type 304 Stainless Steel

  • Resists corrosion
  • More costly than zinc-plated steel

Type 316 Stainless Steel

  • Withstands solvents caused by outdoor environments

Brass and Bronze

  • Good corrosion resistance
  • More expensive than steel


  • Mild resistance to corrosion
  • Weights one-third of steel


  • Resists more chemicals than stainless steel
  • Extremely strong


  • Won’t rust
  • Breaks easily

Black finish

  • Prevents rusting
  • Are All Toyota License Plate Screws The Same Size?

OEM screws are manufactured to meet the needs of specific models and manufacturers. Consequently, each manufacturer produces a range of sizes and materials for their OEM screws. Toyota license plate screws, for example, remain consistent across all models unless otherwise specified by the manufacturer.

What Are The Best Toyota License Plate Screws?

Selecting the correct license plate screws for a Toyota is an important decision. There are various options, such as regular screws, alloy-steel screws, plastic screws, and aluminum screws – all available in multiple designs and materials at different prices. Ensuring the correct type of screw is chosen for the job will ensure the license plate stays securely attached.

The best license plate screws for Toyota have been shortlisted:

Product Name: Material:
HPP License Plate Stainless Steel Srews Stainless Steel
Rustproof, Self Tapping Mounting Bolts Stainless Steel, zinc coating exterior
LivTee Rustproof License Plate Screws Nylon, stainless steel
ProElite Metal Anti-Theft License Plate Fasteners Stainless steel
ProElite Anti-Theft License Plate Fasteners Stainless steel

How To Fix A Snapped License Plate Screw?

Fixing a snapped license plate screw can be tricky but not impossible. Care must be taken to Dremel out a shaft and use a flat head to ease it out, while if the part still feels stuck, penetrating oil may need to be applied for easier removal. When unsuccessful attempts at repair have been made, visiting a workshop for professional help is recommended.

Do Anti-Theft License Plate Screws Work?

This anti-theft screw is a unique one-way fastener that helps guard license plates from theft. Crafted in an unusual design, this screw cannot be removed using standard tools, requiring the unique tool provided with purchase to unlock it. This exclusive feature provides enhanced security for the license plate and peace of mind for the owner.

Is There Any Alternative To License Plate Screw?

Several options are available for those seeking an alternative to the traditional screw-on license plate. Adhesive mounts, tow hooks, and even magnetic mounts can be purchased to prevent any bumper damage caused by license plate screws. These alternatives offer a secure and convenient way of mounting a license plate without risking pesky scratches or scuffs on your vehicle.

Adhesive Mounts

Mounting brackets that use adhesive attach the license plate to the bumper. To determine the most suitable mount, consult their local car accessories dealer or do some online research. Adhesive mounts vary from car to car, so it is essential to choose the right option for optimal effectiveness and longevity.

One should follow the steps outlined to secure an adhesive mount properly:

  • Wipe the mounting spot of the automobile with alcohol wipes to ensure a strong adhesive bond.
  • Hover the mount over the area to check for centering accuracy before proceeding further.
  • Keeping the protective film in place, remove it once ready for placement on the bumper.
  • Securely fasten the license plate using screws onto its corresponding bracket that has already been mounted onto your vehicle’s bumper.
  • Ensure all components are tightened down securely and adequately before operating your car again, as standard safety precautionary measures should always be considered when performing such tasking activities related to automobile maintenance and upkeep!

Tow Hook

The automobile’s tow hook can be used to ensure the front license plate is securely connected.

Installing a tow hook bracket requires the following specific steps:

  • A plastic plate covers the tow hook on most automobiles; this plate should be pushed to reveal the anchor.
  • Tightening the tow hook anchor requires screwing a tow hook stud and spinning clockwise.
  • A bolt should then be installed through the stud and the hole in the center of the bracket, which must be turned clockwise using a ratchet until secure.
  • The license plate can then be attached to the bracket with screws for further reinforcement.
  • All components must be correctly tightened before use for safety reasons.
  • Careful attention must be taken when removing or adjusting these parts for optimal performance and security while operating your vehicle with an attached tow hook system.

Magnetic Mounting Bracket

The installation of a magnetic mounting bracket involves several steps. First, the front bumper must be removed, and then the self-tapping magnet. The license plate bracket is then mounted, followed by reattachment of the bumper and securing the license plate over the top. This process requires great care to ensure proper bracket installation for optimal performance.

Final Words

The importance of license plate screws cannot be understated, as they help ensure the security of a vehicle’s license plate. In addition to being relatively inexpensive, these screws can save drivers from potential future complications and hassle. Investing in suitable quality screws is highly recommended for optimal protection for Toyota owners.

Rate this post

Leave a Comment