Tractor Dashboard Symbols And Meanings

One of the most important things on a tractor dashboard is the Tractor dashboard symbols and meanings. It’s there to communicate important information to the driver, so it needs to be easy to understand. In this post, we will explore the various tractor dashboard symbols and their meanings. From warning lights to fuel levels, you’ll know everything you need to know about these essential symbols. Check it out now!

🌈Colors of Tractor Dashboard Symbols

Colors of Tractor Dashboard Symbols
Colors of Tractor Dashboard Symbols

The tractor dashboard warning lights and symbols may vary depending on the tractor make and model, but generally they indicate a problem with the equipment. Colors of the tractor instrument panel warning lights;

A red warning light indicates a potential danger to personnel or equipment, such as a chemical leak or stalled engine. A blinking red caution light means that the tractor is being operated in an unsafe manner and should be stopped immediately.

A yellow warning light indicates a potential problem that requires careful driving. A flashing yellow warning light means that the tractor is operating at the maximum safe speed for the current conditions.

A green warning light indicates that the tractor is operating normally and does not require attention.

See also: Massey Ferguson dashboard symbols and meanings

🚜Tractor Dashboard Warning Lights and Symbols

Tractor Dashboard Warning Lights and Symbols
Tractor Dashboard Warning Lights and Symbols
1 Fuel Level Gauge This tells you how much fuel is in your tank.
2 Left Turn Indicator When the lever is switched to the left side, a flash should come on.
3 Tachometer Signifies engine speed in revolutions per minute.
4 Right Turn Indicator Flashes when you switch the turn signal to the right.
5 Engine Coolant Temperature Gauge This graphic indicates the engine coolant temperature. The red area on this indicator means that the engine is overheating and needs immediate attention to prevent serious damage. If you see this warning, shut off the engine immediately and have it diagnosed by an authorized John Deere dealership (if necessary).
6 Service Alert Indicator The FSA has a turbine monitor that monitors the wind speed, airflow and other parameters to allow the users to adjust accordingly. If there is an issue, it will illuminate so the user can identify (review message in information display). If not resolved at home, you should take your John Deere vehicle to a John Deere certified dealer for evaluation.
7 Hydraulic Oil Temperature The information display will alert you when the hydraulic oil overheats (review the error message for more details). If necessary, have a John Deere dealer diagnose your vehicle.
8 Electrohydraulic Hitch Indicator Errors in the hitch display will be illuminated if they occur. If things don’t seem right, consult with a John Deere dealer who will diagnose the vehicle.
9 Neutral Indicator If you see the Transmission Information indicator is on and flashing, this indicates there is a problem with your transmission. If you are looking for guidance on what to do next, consult your Owner’s manual for instructions. If the lights stay lit up and you need help, have your John Deere dealer check it out.
10 High Exhaust Temperature Indicator The presence of the temperature allows for an active filter cleaning.
11 Exhaust Filter Indicator Notifies you when the exhaust filter needs to be cleaned, soot levels are getting out of hand.
12 Exhaust Filter Disabled Indicator Warns you when the exhaust cleaner filter has been disabled.
13 Engine Air Cleaner Restriction Indicator This light will turn on when air cleaner element is clogged. If it’s necessary, take to John Deere dealer for diagnosis.
14 Engine Information Indicator Let’s keep our eyes open for any engine malfunctions. When the check oil alert appears, you’ll know it’s time to refil the oil and review error messages in the information display. If necessary, take your vehicle to your John Deere dealer for a diagnosis.
15 Transmission Information Indicator The dash lights will come on when you’re having transmission trouble (review the error message in the info display). If necessary, have your John Deere dealer diagnose your vehicle.
16 Information Display Here is an example of the information that you can pull from your on-board diagnostics monitor.
17 Trailer 2 Indicator These lights flash when your trailer’s turn signal or hazard lights are on.
18 Charging System Indicator The light will turn on to say the alternator is malfunctioning. If this is the case, you should take your vehicle to John Deere for diagnosis.
19 MFWD Engaged Indicator Indicator lights up when the vehicle is in front-wheel drive.
20 PTO Engaged Indicator This light will come on when your car is in reverse gear.
21 High Beam Indicator Illuminates when the headlights are switched on
22 Differential Lock Indicator The headlights will illuminate when the differential lock is engaged.
23 Park Brake Indicator The park brake light will turn on when the brake is engaged.
24 Vehicle Indicator The blinks briefly and turns off when the turn-signal or hazard warning lights to the right of the steering wheel are switched on.
25 Trailer 1 Indicator Comes with a built-in warning system when turn signals or hazard lights are turned on.
26 STOP Indicator The light turns on to indicate when a critical fault has occurred. Power off the engine immediately, and contact John Deere for diagnosis.
27 Vehicle Information Display Displays the vehicle’s Hi/ Lo (If equipped). When in diagnostic mode, displays name of controller that is experiencing fault.
28 PTO Icon The PTO speed illuminates when the person selects it.
29 Hour Meter Icon The great thing about small businesses is that you can get high-quality without spending a lot of money. You pay for what you need, and that’s it. No wasted money or time spent on things you don’t need.
30 Vehicle Information Display On this tractor, you’ll be able to monitor the wheel speed, engine hours, and pto operating speed. And you can verify PTO operation using diagnostic codes.

Some tractor dashboard symbols have specific meanings that are known by almost every driver. For example, the “O” symbol on the oil pressure gauge means “low,” and the “H” symbol on the water level indicator means “high.” Other symbols may have less universal meanings but are still understood by many drivers. An example of this is the warning triangle that is often used to indicate a hazard ahead.

See also: Mahindra Tractor dashboard symbols and meanings

There are a variety of tractor dashboard symbols that can be used to communicate different messages to drivers. Some of the most common symbols include: speedometer, fuel gauge, oil pressure, water level, and temperature.

🛤️Most Common Tractor Dashboard Symbols and Their Meanings

Most Common Tractor Dashboard Symbols and Their Meanings
Most Common Tractor Dashboard Symbols and Their Meanings

On tractor dashboards, you’ll usually see symbols or abbreviations for different things. Here’s a primer on the most common ones:

  • Tractor Dashboard Symbol: Battery

Meaning: This symbol indicates that the tractor’s battery is charging.

  • Tractor Dashboard Symbol: Oil Pressure

Meaning: This symbol indicates the oil pressure in the tractor’s engine. If the oil pressure is too low, it can cause engine damage.

  • Tractor Dashboard Symbol: Coolant Temperature

Meaning: This symbol indicates the coolant temperature in the tractor’s engine. If the coolant temperature gets too high, it can cause engine damage.

  • Tractor Dashboard Symbol: Fuel Level

Meaning: This symbol indicates how much fuel is in the tractor’s tank. When this gauge gets low, it means that you will need to refuel soon.

The Tractor dashboard symbols and meanings can be a little daunting at first, but with a little bit of understanding, you’ll be able to use them to your advantage on the road. This article will outline each symbol and its meaning so that you can start to understand how they work together and start to use them in order to improve your driving experience. Get started learning about tractor dashboard symbols today!

See more: Kubota Dashboard Warning Lights and Symbols

🌾What does this light on my John Deere tractor mean?

To troubleshoot your warning indicators, remember that the yellow “CAUTION” light flashes when indicator lights 7, 8, 12, 13 or 14 come on. If the red “STOP” light flashes and an engine malfunction is detected, turn off the engine immediately.
See also: john deere tractor dashboard symbols and meanings

🚜What lights should be on a tractor?

In most cases, equipment used in the agricultural industry must come with side lights, rear lights, stop lights and indicators. Additionally, the number plate needs to be illuminated so that it can be read at night.

💡What are the three lights on top of a tractor called?

These are lights located at the top-rear of the trailer. They are located around the center of the vehicle. These markers are used to alert drivers that the vehicle is wider than 80 inches and will signal a danger if it cannot stay in its lane.

🌟What are the 2 outer lights on top of the tractor called?

Clearance marker lights are the two outermost fixtures on a cab, which are used to identify the outer edges of the vehicle’s body. These fixtures must be mounted as high and wide as possible, at the reasonable discretion of the vehicle manufacturer.

🔆What are the 5 lights on top of a truck called?

Semi truck headlights are required to have a minimum of five amber lights on top. These lights help notify other drivers about the height of an approaching vehicle.

5/5 - (67 votes)

1 thought on “Tractor Dashboard Symbols And Meanings”

  1. More than one light should be provided for tractors.
    Used to make the tractor more visible to other vehicles, pedestrians, and farm machinery.
    Two lights are mounted on the front of the tractor in a horizontal line about three feet apart; these are white to increase visibility at night.
    One light is mounted on the back of the tractor in a horizontal line about six feet from the ground; this is amber to increase visibility during early morning or late evening hours.

    Reply

Leave a Comment