The Volkswagen Atlas is a modern, full-size SUV that has become increasingly popular for its reliable performance and impressive features. However, like any vehicle, it can still experience issues from time to time. One such issue is the coolant warning light.
This article will provide an in-depth look at what Vw Atlas coolant warning light means and how you can reset it if necessary. We'll also discuss why regular maintenance of your cooling system is so important, as well as tips on how to identify other common problems with your Atlas' cooling system before they become major issues down the road.
By the end of this article, you should have all the information you need to keep your VW Atlas running smoothly long into the future!
What is the Vw Atlas Coolant Warning Light and What Does it Mean?
If you see a light on your dashboard that says "Coolant" and it stays on, the warning means there is a problem with your engine coolant. The most common cause of the light staying on is a broken or missing thermostat. If the Vw Atlas coolant warning light stays on even after you replace the thermostat, there may be more serious problems with your engine. Contact your VW dealer for more information.
Causes of a Vw Atlas Coolant Warning Light on
There can be many reasons why the Vw Atlas coolant warning light may come on. In some cases, a clogged coolant flow meter can cause the light to come on. If this is the case, you will need to take your car in for service. Other causes of the light include a defective thermostat or a failed water pump. If you are experiencing any of these issues, it is important to get them fixed as soon as possible so that the warning light will go away.
How to Fix a Vw Atlas Coolant Warning Light?
If your Volkswagen Atlas is displaying a coolant warning light, there are several things you can do to fix the issue. Some of these include changing the engine coolant, checking the system pressure, and resetting the warning light. Here's how to do each:
Change the Engine Coolant: If the engine coolant is low, it can cause a coolant warning light to turn on. To fix this problem, you'll need to change the engine coolant. Follow these steps to change the engine coolant:
- Remove the front passenger side wheel cover.
- Locate and remove the oil filter cap.
- Remove the cooling fan shroud using a Phillips head screwdriver.
- Disconnect the radiator hose from the water pump (if present).
- Loosen and remove the screws that hold in place the engine block cover.
- Carefully pull off the engine block cover and set it aside.
- Fill up your work area with enough cold water to reach below the oil pan and add enough antifreeze or R-134a to make up 1 quart (1 liter).
- Place the new engine block cover on top of this mixture and screw in place using six screws (three on each side). Tighten screws just until they're snug, then back them off one turn.
If you are experiencing a warning light on your Volkswagen Atlas, ensure that the coolant level is at the correct level and that there is no obstruction in the cooling system. If the issue persists, please contact your Volkswagen dealer for further assistance.
Was this page helpful?