yandex

Reset Fuel Pump Shut Off Switch Location

The car engine cranks but will not start. This is a common issue, as it can be caused by passing over potholes, speed bumps, or being involved in a car accident. Often the solution is to push the reset button on the fuel cut-off switch, which the impact has activated. However, this might not always work as the fuel pump shut-off switch may have become stuck. To assist with finding and resetting such controls on GMC, Ford, Peugeot, VW Golfs, Citroen, Vauxhall, Subaru, Renault, Dacia, Mazda, Chevy, and many other cars that have electric fuel pumps, an article has been written detailing how to find and reset power shut off switches in these vehicles. The article also explains what a 'fuel pump emergency shut off switch' entails so readers can understand why this needs to be done for their car engines to crank successfully again.

📢Read also: How To Reset Dashboard Lights

What is Fuel Pump Emergency Cut-Off Switch?

What is Fuel Pump Emergency Cut-Off Switch
What is Fuel Pump Emergency Cut-Off Switch

This device provides a safety measure for vehicle operators, as it functions analogously to an electric fuse. When the inertia switch is triggered due to a sudden stop or crash, it will shut off the fuel supply and thus prevent further damage from occurring. Car manufacturers' implementation of this device demonstrates their commitment to providing a secure driving experience for their customers.

🎯Suggested article: 2006 Honda Pilot Triangle Warning Light Reset

What is the Fuel Reset Button for?

The fuel reset button is designed to be triggered by an impact or crash, immediately disrupting the gasoline supply to the combustion engine. Typically identified by red or yellow markings, this practical feature can quickly be activated with a firm button press.

5 Important Steps Before Resetting the Fuel Cutoff Switch

Before taking any action, it is essential to confirm that the fuel pump shut-off switch is indeed the cause of engine failure. Carefully examine the situation and determine if other issues are at hand before pushing the "red button." Doing so will ensure optimal performance and safety for all involved.

📢Read also: Nissan Forward Emergency Braking Warning Light Reset

How to tell if the inertia switch is tripped?

To determine if the tripped fuel inertia switch is causing a problem, it is essential to take the following steps:

  1. Verify that the battery is functioning correctly and has enough charge.
  2. Examine the fuel pump relay for any issues with its placement or operation and inspect its connector and wiring for damage.
  3. Inspect the fuse connected to the fuel injector and electric fuel pump to ensure they are not broken or blown out.
  4. Assess whether a clogged-up filter is located in either the engine compartment or inside of the gas tank, which could cause problems with the delivery of gasoline pressure via the vehicle's fuel rail system.
  5. Determine any leaks in the supply line leading from the gas tank across the entire length towards the engine, where gasoline would be injected into cylinders using injection system components.

How to Reset Fuel Pump Shut-Off Switch

After extensive searching, it was determined that the fuel cut-off switch had been tripped due to a car accident. The location of this inertial fuel cut-off switch (car inertia switch) is often behind the drawer/glove compartment on the passenger side. One must push or pull down the button or lever to reset it based on the model and manufacturer's instructions. Doing so will allow for the power supply to be restored to its original state, thus allowing the fuel pump's normal functioning to start up again after an accident.

Steps to Locate and Reset Fuel Cut-Off Switch on Ford Fiesta (For Other Cars, Keep Reading)

To locate the fuel pump reset switch, one should take the following steps:

  1. Open the glove compartment
  2. Pull out the glove compartment by pressing its left side toward an inner section.
  3. Look for a device with either a red button or yellow rubber cap
  4. Push the rubber cap button on the inertia switch

Emergency Fuel Shut-Off Switch Location on Other Cars

The fuel pump shut-off switch is an important safety feature on Ford, Chevy, GMC, Peugeot, VW, BMW, Mercedes-Benz, Citroen, Vauxhall, Subaru, Renault, and Toyota vehicles. It helps to prevent fuel system damage in the event of a collision or other hazardous situation. The location of this switch may be hidden away in various places depending upon the make and model of the vehicle. Here are five common areas where you may find the fuel pump shut-off switch:

  1. Behind or below the glove compartment;
  2. Under the side panel located next to the driver’s door;
  3. On the driver’s side between the footrest area and door;
  4. On the right side of the luggage compartment behind the access panel with a red reset button on top;
  5. Near the liftgate, behind an access panel in a right rear quarter trim panel with a red reset button on top

By finding and resetting the fuel pump cut-off switch, it is possible to avoid a costly visit to the mechanic or having to call in a tow truck. To reset the button, it may be necessary to push down gently 20-30 times until it is loose enough to move down. After turning on then off the ignition for 10 seconds, ensuring that there are no signs of leakage along the fuel line, starting up the engine should not be difficult. Through this process, one can save money and effort by avoiding expensive services from mechanics or tow truck drivers.

Alternative Method For Resetting the Fuel Pump Shutoff Switch

When faced with a severe or moderate crash, the fuel pump shutoff is designed to stop fuel flow to the engine. It is important to note that not all impacts will cause a shutoff. If your vehicle does happen to shut off in this situation, there are steps you can take to restart it.

  1. Start by switching off the ignition key and inspecting for any leaks in the fuel system;
  2. Open up the access panel and press down on the reset button;
  3. Turn on the ignition key, but only allow it to remain for a few seconds before returning it to its 'off' position;
  4. Inspect one more time for any signs of leakage in the fuel system;
  5. Attempt another start-up if no leaks have been detected;
  6. Lastly, check again for any signs of trouble after starting your vehicle again.

📢Read also: Lexus Master Warning Light Reset

Vehicles with Airbag

In a crash, following specific steps to restart your vehicle is essential. Here are five things you should do.

  1. Switch off the ignition.
  2. Move the switch to the start position.
  3. Switch off the ignition again and wait for several seconds before proceeding with other steps or procedures recommended by your manual or expert technician.
  4. Turn on the ignition again to re-enable the fuel pump function in some vehicles, according to the manufacturer's instructions.
  5. If these steps do not result in starting up your vehicle, repeat steps 1 through 4 once more before seeking further assistance from a professional mechanic or technician familiar with this type of repair.

When attempting to restart a vehicle after a fuel shutoff, the engine must evaluate the safety of various systems before allowing for a reset. Depending on the model and make of the car, this switch may be located behind an access panel on either the right side of the luggage compartment or near the liftgate in 5-door vehicles. The reset button will typically be on top of this switch and should be pressed three times if your car does not start up immediately. Contacting a qualified technician for further assistance is prudent if it doesn't start after that.

Was this page helpful?

More important content about Tips and Advice


Tips and Advice

Tractor Dashboard Symbols And Meanings

Suzuki Sx4 Years To Avoid - 5 Worst Years

Cummins ISX Years To Avoid and Why

Car With Key Symbol On Dashboard

Electronic Throttle Control Warning Light On - Why?