yandex

John Deere 5085e Warning Lights

The 5085e John Deere tractor is one of the most popular models on the market. It is a reliable machine that can handle a lot of tough terrain. However, like all machines, it has its own set of warning lights that should be checked regularly.

John Deere 5085e Warning Lights are a crucial part of your tractor's safety system. If one of these lights comes on, it means there is a problem with the tractor. You need to take action to address the issue as soon as possible. Below you can find detailed guide to the indicator and indicator light.

See also: John Deere Warning Lights Meaning

30 Common John Deere 5085e Warning Lights

John Deere 5085e Warning Lights
John Deere 5085e Warning Lights
  1. Fuel Level Gauge: The fuel-level gauge is an important tool in determining the amount of fuel remaining in a tank. It provides a visual indication of how much fuel is left, allowing drivers to make informed decisions about when it’s time to refuel. The gauge works by measuring the pressure or density of the fuel, and then displaying this information on an easy-to-read dial or digital display. This data helps drivers ensure that they have enough gas for their journey, making sure they don't get stranded on long trips with no gas available.
  2. Left Turn Indicator: The left turn indicator is a signaling device that is activated when a vehicle's turn signal switch is flipped to the left-hand side. It will flash rapidly, informing other drivers and pedestrians of the driver's intention to make a left-hand turn. The flashing also serves as an alert for nearby vehicles and pedestrians, allowing them time to adjust their speed or direction accordingly.
  3. Tachometer: A tachometer is a device used to measure engine speed, usually in revolutions per minute (RPM). It helps indicate when an engine's performance is approaching its limits and can be used as part of a system to control engine speed. In vehicles, the tachometer is typically located on the dashboard and may include warning lights or alarms to alert drivers when they are exceeding recommended RPMs.
  4. Right Turn Indicator: When the turn signal switch is switched to the right-hand side, a right turn indicator flash will be activated. This indicates that the driver intends to turn right at an upcoming intersection or destination. The flashing light serves as a warning to other drivers and pedestrians in the area of an impending change in direction by the vehicle.
  5. Engine Coolant Temperature: The engine coolant temperature gauge indicates the engine's temperature. If it moves into the red area, this suggests that the coolant level is too low, there is a dirty radiator or clogged screen. It is essential to shut off the engine immediately to prevent any damage being caused. If in doubt, John Deere should be contacted for diagnosis of the vehicle.
  6. Service Alert Indicator: John Deere advises that if the Service Alert Indicator illuminates, it is an indication that a malfunction has occurred and the customer should review any error message in the Information Display. It is recommended to have a John Deere dealer diagnose the vehicle in order to determine what repairs may be necessary.
  7. Hydraulic Oil Temperature: When the hydraulic oil temperature light illuminates due to the hydraulic oil overheating, it is important to have a John Deere dealer diagnose the vehicle. This will help ensure that any necessary repairs can be made in order to prevent further issues and maintain optimal performance of the vehicle.
  8. Electro hydraulic Hitch Indicator: John Deere has provided drivers with the Electro hydraulic Hitch Indicator to alert them when a hitch malfunction occurs. The indicator will illuminate and an error message will appear in the Information Display, prompting drivers to have their John Deere dealer diagnose the vehicle. By doing so, drivers can ensure that their vehicles are running optimally and safely for all of their hauling needs.
  9. Neutral Indicator: When operating a vehicle equipped with a transmission reverser, the Neutral Indicator will light up when the reverser is in the neutral position. If it is improperly shifted into reverse, then it will flash to indicate this. The operator should cycle back to neutral and if both the flashing indicator and Transmission Information indicator are illuminated at the same time, there might be an issue requiring diagnosis by a John Deere dealer.
  10. High Exhaust Temperature Indicator: The High Exhaust Temperature Indicator Illuminates when temperatures inside the exhaust filter reach a certain level, activating the filter cleaning process. This allows for efficient operating temperatures and reduces wear on internal components, thus providing an overall better performance of the system.
  11. Exhaust Filter Indicator: The Exhaust Filter Indicator Illuminates when the amount of soot in the filter has reached a level that requires it to be cleaned. This is an important part of keeping your vehicle's exhaust system running at peak efficiency and should not be ignored. Regularly checking the indicator light and taking appropriate action can help to ensure that your car runs optimally for many years to come.
  12. Exhaust Filter Disabled Indicator: This indicator Illuminates when the exhaust filter cleaning switch has been disabled. This indicator is a warning sign that indicates the exhaust filter needs to be cleaned or serviced before it can be used again. It is important to ensure that all filters are regularly checked, and if necessary, replaced to ensure optimal performance of any engine system.
  13. Engine Air Cleaner Restriction Indicator: This indicator will illuminate when the air cleaner element is clogged. It is recommended that the air cleaner element be cleaned or replaced to resolve this issue. If necessary, John Deere should be contacted for diagnosis and further assistance with resolving any related problems.
  14. Engine Information Indicator: If the engine information indicator illuminates, it signifies that there is an engine malfunction. In order to diagnose the issue, John Deere recommends immediately checking the oil level and reviewing any error message in the Information Display. If these steps do not resolve the problem, it may be necessary for John Deere to have their dealers diagnose the vehicle.
  15. Transmission Information Indicator: John Deere owners should be aware that if the Transmission Information Indicator illuminates, then it is likely there is a transmission malfunction. In this case, John Deere suggests reviewing any error message in the vehicle's Information Display. If necessary, John Deere recommends having a qualified dealer diagnose the vehicle to ensure proper operation and safety
  16. Information Display: This information display provides a wealth of data to the user. It features a speedometer, an hour meter, and a transmission speed selection (Hi, Lo or R if equipped). Additionally, it also displays PTO Speed, diagnostic trouble codes and on-board diagnostics information – all in one easy-to-read display. This allows users to quickly access important data with minimal effort or confusion.
  17. Trailer 2 Indicator: The Trailer 2 Indicator is designed to provide a visible alert when trailer turn signal or hazard warning lights are activated. When the switch is turned on, the indicator will begin flashing to indicate that the trailer's light system has been engaged. This feature allows drivers to confirm that their trailers are properly illuminated and can help prevent potential accidents caused by improperly lit trailers.
  18. Charging System Indicator: John Deere vehicles have a charging system indicator that will illuminate if an alternator malfunction occurs. If this happens, it is recommended that John Deere dealer diagnose the vehicle to determine the cause of the issue and make any necessary repairs.
  19. MFWD Engaged Indicator: The MFWD Engaged Indicator illuminates when the mechanical front-wheel drive is engaged. This indicator helps to inform drivers that the mechanical front-wheel drive has been activated and is functioning properly. It can be a useful tool for operators, as it allows them to easily monitor their vehicle’s performance. With this feature, users are better able to ensure safe operation of their vehicles in various conditions and terrains.
  20. PTO Engaged Indicator: When a rear power take-off (PTO) is engaged, the PTO Engaged Indicator will illuminate. This indicator helps to ensure that the operator has properly activated the rear PTO and can use it as intended. It also serves as an important safety feature for those operating heavy machinery.
  21. High Beam Indicator: When the headlights are switched on to high beam, the High Beam Indicator illuminates. This is a warning light that lets the driver know that their headlights are in a bright setting, which should be used with care and caution as it can blind other drivers. The indicator will stay illuminated until the lights are changed back to low beam.
  22. Differential Lock Indicator: When the differential lock is engaged, the differential lock indicator illuminates. This indicator will provide visual confirmation to those operating a vehicle that their differential lock has been successfully activated and is now in use. As this feature can be extremely useful during certain driving conditions, it is important for drivers to understand when and how they should engage the differential lock on their vehicles.
  23. Park Brake Indicator: The Park Brake Indicator is designed to illuminate when the park brake has been engaged. This serves as a visual reminder that the park brake is engaged and will remain active until it has been disengaged manually by the driver. The indicator provides an important safety measure for drivers, ensuring that they are aware of when the park brake is in use and can take corrective action if necessary.
  24. Vehicle Indicator: Vehicles are equipped with indicators that begin to flash when the turn-signal or hazard warning lights are switched on. This is an important safety feature as it serves as a visual cue to other drivers and pedestrians that you intend to make a lane change or pull over. The flashing indicator helps ensure the road remains safe for everyone by alerting others of your intentions, allowing them time to adjust their speed and position accordingly. Additionally, the indicator may be used in emergency situations where making sudden stops or turns is necessary.
  25. Trailer 1 Indicator: When the trailer's turn signal or hazard warning lights are switched on, Trailer 1 Indicator will begin flashing. This is a visual signal that informs drivers that the trailer and its corresponding vehicle have been linked correctly to ensure safe navigation on the road. The Indicator also serves as an additional safety feature by quickly alerting those in close proximity of any potential danger.
  26. STOP Indicator: If the STOP indicator illuminates, it is an indication that a serious malfunction has occurred and the engine should be shut off immediately. It is important to review any error messages that may appear in the Information Display to help determine the cause of the issue. If further diagnosis is needed, it is recommended to have a John Deere dealer examine your vehicle.
  27. Vehicle Information Display Shows: The Vehicle Information Display (VID) will, if equipped, show a Hi/Lo indicator. When enabled, the diagnostic mode allows for the display of the name of any controller experiencing a fault. This feature can be used to get an understanding of what component is causing problems in order to diagnose and fix issues with greater accuracy and speed.
  28. PTO Icon: When the Power Take-Off (PTO) speed is selected, a PTO icon illuminates as an indication that the PTO has been activated. This ensures that operators are aware of when the machine is running in this mode and can modify their usage accordingly. It also serves as an additional safety measure to help prevent accidents or incidents resulting from improper use of the equipment.
  29. Hour Meter Icon: The Hour Meter Icon illuminates when the engine has been running for a total of 27 hours. This allows operators to keep track of their engines' usage, alerting them when maintenance may be needed due to excessive use. It is important that operators are aware of this icon, as it provides vital information about the status and health of engine components.
  30. Vehicle Information Display Shows: This Vehicle Information Display is a useful tool for monitoring the performance of vehicles. It provides real-time information on vehicle wheel speed, engine hours, PTO speed and diagnostic code information so that users can better assess their vehicles' performance. This data makes it easier to identify any issues with the vehicle quickly and accurately, allowing users to make adjustments or repairs immediately if necessary. The display also makes it easier to monitor fuel consumption and other metrics in order to ensure optimal operation of the vehicle.

See also: Caterpillar Warning Light Symbols

If you're experiencing warning lights on your John Deere 5085e tractor, it's important to know what they mean and how to fix them. By following the tips in this article, you can quickly diagnose the problem and get back to work. Keep in mind that not all warning lights are indicative of a serious issue; some may just need a simple adjustment or repair. Be sure to consult your owner's manual for more specific information on each light and its corresponding code.

Was this page helpful?

More important content about Tips and Advice


Tips and Advice

Tractor Dashboard Symbols And Meanings

Suzuki Sx4 Years To Avoid - 5 Worst Years

Cummins ISX Years To Avoid and Why

Car With Key Symbol On Dashboard

Electronic Throttle Control Warning Light On - Why?