John Deere is a trusted name in the farming and agricultural industry. Known for its high-quality and durable equipment, John Deere has been around for over 180 years. One of the most important things to know when operating a John Deere machine is what indicator warning lights mean. John Deere Indicator Warning Lights keep you safe and informed while you work. This blog post will review some of the most common indicator warning light codes for John Deere machines.
🚨You may be interested in: John Deere Tractor Warning Lights Meaning
List Of John Deere Indicator Warning Lights Codes
|1||Fuel Insights||Shows the remaining fuel in the tank.|
|2||Signaling Intentions (Left)||Blinks when signaling a left turn.|
|3||Engine’s Heartbeat||Displays engine speed in RPM.|
|4||Signaling Intentions (Right)||Blinks when signaling a right turn.|
|5||Engine Health Monitor||Indicates engine coolant temperature. Red signifies overheating. Immediate action is required.|
|6||Service Alert||Lights up during malfunctions. Consult John Deere dealer for diagnosis.|
|7||Hydraulic System Watch||Warns when hydraulic oil overheats. Dealer consultation is advised.|
|8||Hitch System Alert||Indicates hitch malfunctions. Dealer diagnosis recommended.|
|9||Neutral Gear Indicator||Signifies a neutral position in the transmission reverser. Flashes during improper shifts.|
|10||Exhaust Heat Monitor||Lights up during high exhaust filter temperatures, indicating active cleaning.|
|11||Exhaust Filter Status||Indicates high soot levels in the filter, signaling the need for cleaning.|
|12||Exhaust Cleaning Mode||Lights up when the exhaust filter cleaning function is disabled.|
|13||Air Intake Monitor||Warns of a clogged air cleaner element. Replacement or cleaning might be needed.|
|14||Engine Status Alert||
Indicates engine malfunctions. Check oil levels and consult the Information Display.
|15||Transmission Health Indicator||Lights up during transmission issues. Refer to the Information Display for details.|
|16||On-Board Diagnostics||Displays metrics like speedometer, hour meter, PTO Speed, and diagnostic codes.|
|17||Trailer Signal (2nd)||Flashes when the second trailer’s turn signal or hazard lights are activated.|
|18||Power Supply Monitor||Indicates issues with the alternator. Consultation with a John Deere dealer is advised.|
|19||Drive Mode Status||Lights up when the mechanical front-wheel drive is active.|
|20||PTO Engagement Alert||Indicates when the rear PTO is in operation.|
|21||High Beam Status||Shines brightly when the headlights are set to a high beam.|
|22||Differential Lock Alert||Indicates when the differential lock is engaged for better traction.|
|23||Parking Brake Status||Lights up to show the parking brake is securely engaged.|
|24||Main Vehicle Signal||Flashes in sync with the vehicle’s turn signal or hazard warning lights.|
|25||Trailer Signal (1st)||Flashes when the primary trailer’s turn signal or hazard lights are activated.|
|26||Emergency Stop Alert||Warns of a critical malfunction. Immediate engine shut-off is advised.|
|27||Vehicle Diagnostics Display||Displays Hi/Lo settings and, in diagnostic mode, shows the faulty controller’s name.|
|28||PTO Speed Icon||Lights up when a specific PTO speed is chosen.|
|29||Engine Hour Monitor||Indicates when engine hours are displayed, referencing the 27th indicator.|
|30||Vehicle Performance Metrics||Provides data on wheel speed, engine hours, PTO speed, and diagnostic codes.|
John Deere Indicator Warning Lights
If one of your John Deere indicator lights is flashing, it’s trying to tell you something. But what? Check out this list of John Deere indicator warning light codes to find out:
- Blinking Lights: A blinking light on your John Deere tractor indicates an overloaded system or component. Several things could cause this, so paying attention to the other indicator lights and messages on the display screen is essential. If more than one light blinks, start with the highest-priority light and work your way down.
- Solid Lights: A solid light on your John Deere tractor usually indicates a problem with a system or component. This could be anything from a low fluid level to a faulty sensor. Again, pay attention to the other lights and messages on the display screen for more information.
🚨You may be interested in: John Deere Gator 825i Warning Lights
John Deere Tractor Warning Lights
The John Deere tractor warning lights are designed to give the operator a quick visual reference of the tractor’s status. The following list details the meaning of each warning light:
- Fuel Gauge: The fuel gauge warns the operator when the fuel level is low.
- Oil Pressure Gauge: The oil pressure gauge warns the operator when the oil pressure is low.
- Temperature Gauge: The temperature gauge warns the operator of the high engine temperature.
- Amp Gauge: The amp gauge warns the operator when the electrical system is overloaded.
- PTO Switch: The PTO switch warns operators to disengage the power take-off (PTO) before shifting gears.
📢Read also: John Deere 5085e Warning Lights
John Deere Combine Warning Lights
Knowing what it means is essential if you see a warning light on your John Deere Combine. Here are some of the most common indicator lights and their meanings:
- Amber Engine Light: This light indicates a problem with the engine. It could be low on oil, overheating, or fuel issues.
- Red Transmission Light: This light means there is a transmission problem. It could be low on fluid or have an issue with the clutch.
- Yellow Hydraulic Light: This light indicates a problem with the hydraulic system. It could be low on fluid or leak into the system.
- Orange Grain Level Sensor Light: This light means the grain level sensor is not working properly. This could lead to issues with the combine’s ability to harvest correctly.
- Green Fieldnet Connected Light: This light means the combine is connected to Fieldnet, John Deere’s cloud-based data management system.
John Deere Lawn Tractor Warning Lights
If you’re operating a John Deere lawn tractor and you see a warning light on the dash, knowing what that light means is essential. Here are some standard John Deere indicator warning light codes:
- Amber Engine Light: This light indicates a problem with the engine. It could be anything from low oil pressure to a fuel system issue. If this light comes on, stop the tractor immediately and check the engine.
- Red Battery Light: This light means there is a problem with the battery or charging system. Stop the tractor and check the battery connections to see if this light comes on.
- Yellow Fuel Filter Light: The fuel filter must be replaced. Stop the tractor and replace the fuel filter if this light comes on.
- Red Brake Light: This light means a problem with the brake system. If this light comes on, stop the tractor immediately and check the brakes.
What do the John Deere Indicator Warning Lights Mean?
The John Deere Indicator Warning Lights are essential for farmers to know and understand. These lights have three different colors, each with its own meaning. Here is a breakdown of what the John Deere Indicator Warning Lights mean:
- Red: A red light on your John Deere machine indicates a severe problem. You should stop the engine immediately and investigate the issue.
- Amber: An amber light means that there is a potential problem. You should check the machine and ensure everything functions correctly before using it.
- Green: A green light means everything is operating as it should be.
📢Read also: John Deere Tractor Dashboard Symbols
How to Respond to John Deere Indicator Warning Lights?
When one of your John Deere indicator warning lights comes on, it’s essential to know how to respond. Depending on the light and the severity of the issue, you may need to take immediate action or keep an eye on the problem.
When you see a John Deere indicator light, the most important thing is to check the owner’s manual. This will tell you what the light means and what, if any, action you need to take.
If the light is red or flashing, this indicates a severe problem that needs to be addressed immediately. If the light is yellow or amber, it may mean a less severe issue that can be monitored.
If you’re unsure what to do, don’t hesitate to contact your John Deere dealer or a qualified service technician for help. They’ll be able to diagnose the problem and get you back up and running quickly and safely.
John Deere indicator warning light codes can be tricky to decipher, but thankfully, we have compiled a list of the most common ones for you. Next time you’re driving your John Deere tractor and see a warning light, consult this list to see what it means and take the appropriate action. And as always, if you’re ever in doubt, ask your local John Deere dealer for help.
FAQs About John Deere Indicator Warning Lights Codes
What are the most common dashboard warning lights, and what do they mean?
A green or blue light indicates that a system is operational, while an orange/yellow warning light signals the need for servicing or repair. Red lights are more urgent and require immediate attention to avoid further damage.
What does the exclamation mark mean on a John Deere tractor?
The engine oil pressure warning light will come on if the oil level is low. When this occurs, shutting off the engine and checking the oil level with a dipstick is essential. Adding more oil or getting an oil change may be necessary to ensure the vehicle runs smoothly and safely.
What does the red light on John Deere’s mower mean?
When the red area indicates overheating, it is essential to shut off the engine to prevent possible damage immediately. This could result from a low coolant level, a dirty radiator, or a clogged screen. In this case, a diagnosis from a John Deere dealer would be necessary.
Why is the oil pressure light flashing on my John Deere?
The individual indicated that the cause for the dashboard light illuminating was likely due to a low oil level, potentially stemming from a leak in either the seals or gasket. Additionally, there may be a plugged filter causing this issue as well. Nonetheless, it is not out of the question that this alert indicates something more serious, such as worn bearings, crankshaft, or oil pump.