Ford Edge 3.5 V6 Cylinder Numbering

The Ford Edge is a great car. It’s sleek and stylish, and it offers an amazing driving experience. But did you know there are different Ford Edge 3.5 V6 Cylinder Numbering? In this blog post, we will explore the different cylinder numbers for the Ford Edge and explain what they mean.

What is cylinder numbering?

What is cylinder numbering
What is cylinder numbering?

The engine in the Ford Edge is usually configured with a V-8 configuration. Each cylinder in the V-8 is numbered from 1-6. The first cylinder, or "1," is the most toward the front of the engine and the sixth cylinder, or "6," is located at the back.

The Ford Edge 3.5 V6 Cylinder Numbering

The Ford Edge 3.5 V6 Cylinder Numbering
The Ford Edge 3.5 V6 Cylinder Numbering

The Ford Edge's 3.5 liter V6 is found in both the Titanium and Magnetic versions of the car. The engine utilizes direct injection and twin turbocharging to produce 301 horsepower. It can reach a top speed of 191 mph, making it one of the fastest cars on the market today. Ford offers a variety of transmission choices for this engine, including a six-speed automatic or an eight-speed automatic.

Each Edge model has its own specific cylinder number, which helps to identify the car's make and model. Here are the cylinder numbers for both editions of the Ford Edge:

Edge Titanium: 2Z3Z-19201-BAB
Edge Magnetic: 2Z3Z-19202-CAE

What to look for when purchasing a used Ford Edge

What to look for when purchasing a used Ford Edge
What to look for when purchasing a used Ford Edge

When purchasing a used Ford Edge, it is important to inspect the VIN number. The VIN number is located on the drivers side door jam. It should be noted at this point that not all Ford Edges will have a VIN number. If the vehicle does not have a VIN number, then it can only be identified by its chassis code or vehicle identification number.

Once the correct VIN has been determined, it is next important to lookup the cylinder count. This information can be found on the engine block or under the hood depending on the model year of the Ford Edge. Knowing the cylinder count will help determine what modifications have been made to the engine and also give you an idea of its age.

Another important factor to consider when purchasing a used Ford Edge is its estimated mileage. This figure can be found in several places such as online resources, car manuals, or even dealer advertisements. By knowing how many miles are on the vehicle, you can get an estimate of how much maintenance and repairs may need to be carried out over time.

How to change the engine number on a Ford Edge

How to change the engine number on a Ford Edge
How to change the engine number on a Ford Edge

Ford Edge engines come with a VIN number which is typically located on the driver's side frame rail just behind the front seat. The engine number can be changed by removing the intake manifold and resealing it using RTV silicone. Next, remove the spark plugs and use a wire brush to clean all of the carbon deposits off of the cylinder walls. Finally, replace the intake manifold and reattach it using new bolts and washers.

Ford Edge 3.5 V6 engines have a unique numbering system that you need to be aware of in order to properly service your vehicle. The first two digits denote the engine type, with an E for EcoBoost and V for forced induction. The next three digits indicate the engine block number, with a 1 representing the first cylinder and so on. If you ever need to rebuild or replace any components on your Edge engine, be sure to use Ford Edge 3.5 V6 Cylinder Numbering layout as a reference guide!

Was this page helpful?

More important content about Ford


Tips and Advice

Electronic Throttle Control Warning Light On - Why?

How Many Lamborghinis Are There In The World? - 2023 Data

Why Are All the Dashboard Lights On in My Car?

Pennzoil Vs. Mobil 1 Comparison: Which Motor Oil is Better?

Harley Davidson Emergency Lights - How To Turn Off?